Receive More Updates

Date: - Time:
SMS: Send FOLLOW BLAZERWAP To 40404 For Free - EMAIL: Blazerwap@gmail.com

Thursday, 11 August 2016

New Way To Fix Your Brick MTK Phone After Interrupted Flashing Process

Have your MTK device been bricked after interrupting the flashing process while using SP flashtool? Well, there is a fix to revive and make it work perfectly again to it normal function.

Normally, no matter how you might carefully handle your Android device or smartphone when it has come to time for it to develop fault or misbehave, it won't hesitate to do so even without your permission. So there are many ways or methods to fix it and revive a bricked device.


Many smartphones have been bricked and even one of my guy that experienced this issue in his phone, he eventually threw the phone away and went for another smartphone but now, no need to throw your smartphone away because the perfect solution has come for it.

One of the issue with SP flash tool, it happens as a result of careless flashing process and one of those careless acts is interrupting the flashing process either by touching the USB chord or shaking you PC/desktop while the flashing process is still going on and the phone will go off without powering back again. You might even get the USB device not recognized error on further flashing attempts that's surely means your device have been bricked it is also called a dead phone.

How to fix a bricked or dead phone from mtk family

I hope you know the mtk families like the Tecno, Infinix, Gionee and many more smartphones. So to fix it kindly follow this process below;


  • Just take your phone and connect it to your desktop for charging or to any power source around your environment and if the phone have successfully revived back, you will see 1℅ or 2% .
  • So leave it to reach the maximum limit of charge which is 100% and then start blazing with it.
You can also use these two methods below;


  • Kindly remove the battery of the dead or brick phone.
  • So then connect the phone to a charger without battery inside.
  • After that, kindly slot in the battery while the phone is still connected to the charger.
  • You could also keep pressing the Volume up + Power button while the device is charging.
Or 

  • Kindly remove and boost the battery using a desktop or an external charger then resume internal charging.
  • After that, uninstall then re-install MTK vcom drivers you have earlier on installed on your PC/desktop computer.

With those methods above, you will be able to fix and revive back your bricked mtk smartphone easily without any hard work. 

Is it helpful? If you have more questions kindly ask below. 

2 comments:

Is this post helpful?

Your comment(s) are highly appreciated to this post. Be the first to comment and make sure you also share to your friends and families about this post, for them to also benefit from it.

Share to all social networks like Facebook, Twitter and others social network you may know.

Are you finding it difficult to drop a comment here? Kindly click here and learn how to comment on Blazerwap.com